Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
Shift Indicator: Adjustments
ADJUSTMENT
CAUTION:
-
All SRS wire harnesses are covered with yellow insulation. Before you disconnect any part of an SRS wire harness, disconnect the airbag
connectors.
-
Whenever the ignition switch is ON (11), or has been turned OFF for less than three minutes, be careful not to bump the SRS unit; the airbags
could accidentally deploy and cause damage or injuries.
1. Check that the index mark on the indicator aligns with the [N] mark on the shift indicator panel when the transmission is in NEUTRAL.
2. If not aligned, remove the center console.
3. Loosen the shift indicator panel mounting screws and adjust by moving the panel.
NOTE: Whenever the shift indicator panel is removed, realign it as described above.
