Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
Drive Belt: Service and Repair
Automatic Transmission
COMPRESSOR BELT / REPLACEMENT
Automatic Transmission
1. Loosen the adjust pulley bracket pivot bolt and the adjusting bolt, then remove the A/C compressor belt from the pulleys.
2. Remove the two mounting bolts from the left front engine mount, then pass the A/C compressor belt through the gap between the body and left
front engine mount.
3. Install in the reverse order of removal, and adjust the A/C compressor belt See: Adjustments.