Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
2) Tighten the filter by turning it clockwise seven numbers from the marked point. For example, if a mark is made under the number 2 when the
rubber seal is seated, the filter should be tightened until the number 1 comes up to the marked point.
5. After installation, fill the engine with oil up to the specified level, run the engine for more than 3 minutes, then check for oil leakage and oil level.
CAUTION: Installation using other than the above procedure could result in serious engine damage due to oil leakage.