Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
Front Passenger's Side Mounting Bolts
-
Remove the four mounting nuts from the bracket.
-
Lift the front passenger's airbag out of the dashboard by covering the lid and dashboard with a cloth, and prying carefully with a flat-tip
screwdriver.
NOTE: The lid of the airbag has pawls on its side which attach it to the dashboard.
CAUTION: Be sure to install the SRS wiring so that it is not pinched or interfering with other parts.
5. Install the new airbag(s):
Front Passenger's Side Upper/Lower Mounting Bolts
-
Place the front passenger's airbag into the dashboard.
-
Loosely install all four mounting nuts.
-
Tighten the upper two nuts first, then tighten the lower two nuts. Adjust the lower mounting bracket if necessary.
6. Reconnect the airbag connector(s).