acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Cable Reel Replacement|Page 7610 > < Cable Reel Replacement|Page 7608
Page 4
background image

Cable Reel Replacement

13. Carefully install the cable reel on the steering column shaft. Then connect the 2P connector to the SRS main harness, and connect the 3P connector

to the main wire harness.

14. Install the steering column covers.

Cable Reel Arrow Mark

15. If necessary, center the cable reel. (New replacement cable reels come centered.) Do this by first rotating the cable reel clockwise until it stops.

Then rotate it counterclockwise (approximately two and a half turns until the arrow mark on the cable reel label points straight up.

16. Install the steering wheel, then connect the horn connector and cruise control set/resume switch connector.

Cable Reel Replacement|Page 7610 > < Cable Reel Replacement|Page 7608