Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
Lower and center anchor bolt construction:
Installation is the reverse of the removal procedure.
NOTE:
-
Make sure you assemble the washers and collars on the upper anchor bolt as shown
-
Before attaching the side trim panel (Hatchback) or rear shelf (Sedan), make sure there are no twists or kinks in the rear seat belt.
-
Before attaching the seat-back, side bolsters (Sedan) and seat cushion, make sure there are no twists or kinks in the rear seat belts.
-
When installing the seat cushion, slip the seat belt buckles through the slits in the seat cushion.