Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
(Mitsubishi)
4. Separate the rear housing and drive-end housing with the stator attached to the rear housing.
(Mitsubishi)
5. Separate the rear housing from the stator/rectifier assembly by removing the four screws and the terminal nut.
(Mitsubishi)
6. Unsolder the rectifier from the stator leads.
-
To avoid damaging the diodes with heat, pinch the stator leads between pliers to carry heat OFF, and apply the soldering iron only long
enough to separate the leads from the rectifier.
-
Use a 100 W soldering iron.