Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
x 10 mm roller.
5. Align the hooked end of the snap ring with the pinion shaft as shown, then install the snap ring in the differential carrier groove.
6. Install the final driven gear, then tighten the bolts to the specified torque.
TORQUE: 103 Nm (10.5 kgf.m, 76 ft. lbs.)
NOTE: The final driven gear bolts have left-hand threads.
7. Install the ball bearings.
OIL SEAL REMOVAL
1. Remove the differential assembly.