Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
Back Window Glass: Service and Repair
Sedan
Removal
Sedan
CAUTION:
-
Wear gloves to remove and install the rear window.
-
Do not damage the defroster grid lines.
1. To remove the rear window, first remove:
-
Trunk lid
-
Rear seat-back side bolsters
-
Rear shelf
-
Rear pillar trim panel
2. Disconnect the defroster leads, and remove their holders.
NOTE: Avoid scratching the rear window with the cutter blade.
3. Remove the clips, then remove the lower cover.
NOTE: Use a clip remover to remove the clips.
4. Peel off the molding.