Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
-
Keep water, dust, and abrasive materials away from the primed surface.
11. With a sponge, apply a light coat of body primer to the original adhesive remaining around the rear window opening flange. Let the body primer
dry for at least 10 minutes.
NOTE:
-
Do not apply glass primer to the body, and be careful not to mix up glass and body primer sponges.
-
Never touch the primed surfaces with your hands.
12. Thoroughly mix the adhesive and hardener together on a glass or metal plate with a putty knife. Follow the instructions that came with the
adhesive.
NOTE: Clean the plate with a sponge and alcohol before mixing.
13. Before filling a cartridge, cut the end of the nozzle as shown.
14. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking gun, and run a bead of adhesive
around the edge of the rear window as shown.