Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
NOTE: Hold the adjusting bolts with a hex wrench when loosening the locknuts.
5. Repeat steps 3 through 4 until clearance "H" is within the specified limits, then fasten the glass guide and regulator. Press the stopper plates
against the glass stoppers, then fasten the stopper plates.
NOTE: Check that the stopper plates contact the glass stoppers evenly.
6. Align the front sash with the glass, then fasten the front sash.
12. Adjust clearance "B" as follows.
1. Lower the glass 10 mm (0.39 in).
2. Push the glass outward 10 mm (0.39 in), then push the inside stabilizers against the glass lightly. Fasten the inside stabilizers.