Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
NOTE: Clean the shadowed area.
4. If the old quarter glass is to be reinstalled (and either of the clips are broken off the molding), apply a light coat of primer (C-100, or equivalent),
then apply the butyl tape to the molding as shown.
NOTE:
-
Be careful not to touch the quarter glass where adhesive will be applied.
-
Do not peel the separator off the butyl tape.
5. If the old quarter glass is to be reinstalled (and either of the clips are broken off the molding), seal the body holes with pieces of urethane tape. Set
the quarter glass upright in the opening, make alignment marks across the quarter glass and body with a grease pencil at the three points shown,
then remove the quarter glass.