Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
NOTE:
-
Do not apply glass primer to the body, and be careful not to mix up glass and body primer sponges.
-
Never touch the primed surfaces with your hands.
8. Thoroughly mix the adhesive and hardener together on a glass or metal plate with a putty knife.
NOTE:
-
Clean the plate with a sponge and alcohol before mixing.
-
Follow the adhesive manufacture's instructions.
9. Before filling a cartridge, cut the end of the nozzle as shown.
10. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking gun, and run a bead of adhesive
around the edge of the quarter glass as shown.