Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
Wiper Motor: Testing and Inspection
Rear Window Motor Test
REAR WINDOW WIPER MOTOR / TEST
1. Disconnect the 4-P connector from the wiper motor.
2. Test the motor by connecting battery power to the A (GRN/BLK) and ground to the C (GRN) terminals. The motor should run smoothly.
3. If the motor does not run or fails to run smoothly, replace it.
4. Reconnect the 4-P connector to the wiper motor assembly.
5. Connect an analog voltmeter between the D (LT GRN/BLK) and B (BLK) terminals. Run the motor by turning the wiper switch ON.
The voltmeter should alternately indicate 0 V and more than 4 V.
NOTE: Use an analog tester.