Integra RS Coupe L4-1834cc 1.8L DOHC MFI (1998)
Ambient Temperature Sensor / Switch HVAC: Description and Operation
A/C Compressor Controls
How the Circuit Works
Battery voltage is supplied through fuse 56 to the A/C compressor clutch relay contacts at all times.
With the ignition switch in ON (II), voltage is applied to the coil of the A/C compressor clutch relay through fuse 17. When you push the A/C switch ON
, and the heater fan switch is in position 1, 2, 3, or 4, a "ground" input is provided to the engine or powertrain control module (ECM or PCM) through
the A/C thermostat and the A/C pressure switch.
The A/C compressor clutch relay is grounded by the engine or powertrain control module (ECM or PCM). When energized, the A/C compressor clutch
relay allows battery voltage to turn on the A/C compressor clutch.
The A/C ON indicator light comes on when the A/C system is requested.
A/C Thermostat
The A/C thermostat is located on the evaporator housing. The A/C thermostat turns off the A/C compressor clutch if the temperature at the evaporator
goes below 3 °C (37 °F). This prevents condensation from freezing on the evaporator fins and blocking the air delivery into the passenger compartment.
The blower motor will keep running when the sensor turns off the compressor.
