acura Workshop Repair Guides

Acura (Honda) Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Power Distribution Relay: Testing and Inspection

RELAY TEST

Normally-Open Type
1. Remove the power relay from its socket.

2. Check continuity between relay terminals.

-

There should be continuity between the A and B terminals when power and ground are connected to the C and D terminals.

-

There should be no continuity when power is disconnected.

Type 1

Type 1

Type 2

Type 2

-

Power Window Relay

-

Radiator Fan Relay

-

Blower Motor Relay

-

A/C Compressor Clutch Relay

Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Relay > Component Information > Testing and Inspection

< PREV PAGE NEXT PAGE >