acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

ABOUT US
Testing For a Short to Ground With A Test Light or DVOM|Page 619 > < Testing For a Short to Ground With A Test Light or DVOM|Page 617

Integra RS Coupe L4-1834cc 1.8L DOHC MFI (1998)

Page 2
background image

SRS Unit Replacement

4. Remove the left side cover from the SRS unit, then disconnect the SRS main harness 18P connector from the SRS unit.
5. Remove the four Torx bolts from the SRS unit, then pull out the SRS unit from the driver's side.

SRS Unit Replacement

6. Install the new SRS unit.
7. Connect the SRS main harness 18P connector to the SRS unit; push it into position until it clicks.
8. Install the SRS unit covers (right and left). Make sure the covers snap together in the middle.

Testing For a Short to Ground With A Test Light or DVOM|Page 619 > < Testing For a Short to Ground With A Test Light or DVOM|Page 617