Integra RS Coupe L4-1834cc 1.8L DOHC MFI (1998)
5. Fit the circlip into the driveshaft groove.
NOTE: Always rotate the circlip in its groove to be sure it is fully seated.
6. Fit the rollers to the spider with their high shoulders facing outward.
Note these items during reassembly:
-
Reinstall the rollers in their original positions on the spider by aligning the marks.
-
Hold the driveshaft pointed up to prevent the rollers from failing off.
7. Pack the inboard joint with the joint grease included in the new driveshaft set.
