Integra RS Sedan L4-1834cc 1.8L DOHC MFI (1997)
7. Before installing the plastic cover, make sure the door harness and connectors are fastened correctly on the door.
8. Install the plastic cover and bracket.
NOTE:
-
Apply adhesive along the edge where necessary to maintain a continuous seal and prevent water leaks.
-
Do not plug the elongated hole.
9. Install the door panel.
NOTE:
-
Make sure the door harness is not pinched.
-
If necessary, replace any damaged clips.
-
Make sure the connectors are connected properly.
10. Install the armrest pocket and inner handle trim.