Integra RS Sedan L4-1834cc 1.8L DOHC MFI (1997)
Constant Velocity Joint: Service and Repair
1. Remove the set ring from the inboard joint.
2. To remove the boot band, pry up the locking tabs with a screwdriver and raise the end of the band.
CAUTION: Take care not to damage the boot.
NOTE: Carefully clamp the driveshaft in a vise with son jaws.
-
If the boot band is the welded type, cut it off as shown.
3. Mark each roller and inboard joint to identify the locations of rollers and grooves in the inboard joint. Then remove the inboard joint on the shop
towel.