Integra RS Sedan L4-1834cc 1.8L DOHC MFI (1997)
4. If the clearance is more than the service limit, measure distance (A) on the spacer collar.
-
Standard: 26.03 - 26.08 mm (1.025 - 1.027 inch).
5. If distance (A) is not within the standard, replace the spacer collar with a new one. If distance (A) is within the standard measure the thickness of
4th gear.
-
If the thickness of 4th gear is less than the service limit, replace 4th gear with a new one.
-
If the thickness of 4th gear is within the service limit, replace the 3rd/4th synchro hub with a new one.
6. Measure the clearance between 5th gear and the spacer collar.
-
Standard: 0.06 - 0.21 mm (0.002 - 0.008 inch).
-
Service limit: 0.3 mm (0.012 inch).
7. If the clearance is more than the service limit, measure distance (B) on the spacer collar.
-
Standard: 26.03 - 26.08 mm (1.025 - 1.027 inch).