acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Trunk / Liftgate Lock Cylinder > < Trunk / Liftgate Latch Release Cable|Service and Repair
Page 2
background image

NOTE:  Remove the rear seat and center pillar lower trim , then pull the carpet back, as necessary. Remove the left trunk side panel.

Installation is the reverse of the removal procedure.

NOTE:

-

Make sure each opener cable is routed and connected properly.

-

Make sure the hood, hatch, trunk lid and fuel lid open properly.

Trunk / Liftgate Lock Cylinder > < Trunk / Liftgate Latch Release Cable|Service and Repair