Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-4391003.png)
2. Remove all clips from under the seat cushion, then loosen the seat cushion cover.
3. Pull back the edge of the seat cushion cover all the way around, then release the clips.
Installation is the reverse of the removal procedure.
NOTE:
-
To prevent wrinkles when installing a seat cover, make sure the material is stretched evenly over the pad before securing all the clips.
-
Replace the released clips with new ones.
