Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-1010003.png)
12. Use the wooden handle of a hammer to drive the pistons out.
CAUTION:
-
Take care not to damage the contact surface of the metal gasket.
-
When removing the piston/connecting rod, take care not to hit the oil jet (B18C1, B18C5 engines). If the oil jet nozzle is damaged or bent,
replace the oil jet assembly.
13. Reinstall the rod bearings and caps after removing each piston/connecting rod assembly.
14. Mark each piston/connecting rod assembly with its cylinder number to avoid mix-up on reassembly.
NOTE: The existing number on the connecting rod does not indicate its position in the engine, it indicates the rod bore size.
