Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
Rocker Arm Assembly: Service and Repair
Removal
REMOVAL
1. Hold the rocker arms together with a rubber band to prevent them from separating.
2. Remove the intake and exhaust rocker shah orifices, then remove the VTEC solenoid valve and the sealing bolts.
NOTE: The shapes of the rocker shaft orifices of the intake and exhaust are different. Identify the parts as they are removed to ensure
reinstallation in the original locations.
3. Screw 12 mm bolts into the rocker arm shafts. Remove each rocker arm set while slowly pulling out intake and exhaust rocker arm shafts.