Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-1019002.png)
6. Check that each mid rocker arm moves independently of the primary and secondary rocker arms.
7. Check the mid rocker arms of each cylinder at TDC.
-
If the mid rocker arm does not move, remove the mid, primary and secondary rocker arms as an assembly and check that the pistons in the mid
and primary rocker arms move smoothly.
-
If any rocker arm needs replacing, replace the primary, mid, and secondary rocker arms as an assembly.
INSPECTION USING SPECIAL TOOLS
CAUTION:
-
Before using the valve inspection tool, make sure that the air pressure gauge on the air compressor indicates over 400 kPa (4 kgf/cm2, 57 psi)
-
Inspect the valve clearance before rocker arm inspection.
-
Cover the timing belt with a shop towel to prevent getting oil on the belt.
-
Check the mid rocker arms of each cylinder at TDC .
1. Remove the cylinder head cover.
2. Plug the relief hole with the special tool (Air stopper).
