Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
1. Position the crankshaft and the camshaft pulleys as shown before installing the timing belt.
A. Set the crankshaft so that the No. 1 piston is at Top Dead Center (TDC). Align the groove on the teeth side of the timing belt drive pulley to
the V pointer on the oil pump.
B. Align the TDC marks on intake and exhaust pulleys.
2. Install the timing belt tightly in the sequence shown.
(1) Timing belt drive pulley (crankshaft) -> (2) Adjusting pulley -> (3) Water pump pulley -> (4) Exhaust camshaft pulley -> (5) Intake camshaft
pulley.
3. Loosen and retighten the adjusting bolt to tension the belt.
4. Rotate the crankshaft about 4 to 6 turns counterclockwise so that the belt positions on the pulleys.
5. Adjust the timing belt tension.