Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-3469001.png)
Air Door Cable: Adjustments
Air Mix Control Cable
Air Mix Control Cable
1. Disconnect the air mix control cable from the air mix control arm and the clamp.
2. Set the temperature control lever to MAX. HEAT.
3. Turn the air mix control arm, as shown, then connect the end of the air mix control cable to the air mix control arm.
4. Gently slide the air mix control cable housing back from the end enough to take up any slack in the air mix control cable, but not enough to make
the temperature control lever move, then snap the air mix control cable housing into the clamp.
NOTE: The heater valve cable should always be adjusted whenever the air mix control cable has been disconnected.
