Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-4860001.png)
Dimmer Switch: Testing and Inspection
DASH LIGHTS BRIGHTNESS CONTROLLER / INPUT TEST
NOTE: Be careful not to damage the controller and the instrument panel.
1. Remove the instrument panel from the dashboard.
2. Remove the dash lights brightness controller from the dashboard, then disconnect the 3-P connector.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
If the terminals look OK, make the following in-put tests at the connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the dash lights brightness controller must be faulty; replace it.
