Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-4867001.png)
Fuel Gauge Sender: Service and Repair
FUEL GAUGE SENDING UNIT / TEST AND REPLACEMENT
WARNING: Do not smoke while working on the fuel system. Keep open flames away from your work area.
1. Remove the rear seat.
2. Remove the protective cover and access panel from the floor.
3. With the ignition switch OFF, disconnect the 3-P connector from the fuel gauge sending unit.
4. Remove the fuel gauge sending unit.
5. Measure the resistance between the A and B terminals at E (empty), 1/2 (half full) and F (full) by moving the float.
