Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
Center Mounted Brake Lamp: Service and Repair
High Mount Brake Light Replacement (Bulb Type)
HIGH MOUNT BRAKE LIGHT / REPLACEMENT (BULB TYPE)
Hatchback:
1. Open the hatch.
2. Remove the two clips and the cover.
3. Remove the two nuts and the high mount brake light, then disconnect the 2-P connector.
4. Turn the socket 45° counterclockwise to remove the bulb.
5. Install the high mount brake light in the reverse order of removal, and clean the rear window glass before installing.
CAUTION: When installing the high mount brake light, make sure the rubber seal fits against the rear window evenly.