acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Headlamp Switch > < Hazard Warning Switch|Testing and Inspection|Page 9620
Page 1
background image

Headlamp Bulb: Service and Repair

HEADLIGHT / REPLACEMENT

1. Remove the front bumper.

2. Remove the mounting bolts, then pull out the head-light, and disconnect the connectors from it.
3. After replacement, the horizontal and vertical aiming must be checked using conventional methods. Use the aiming charts See: Adjustments.

BULB / REPLACEMENT

CAUTION:
-

Halogen headlights can become very hot in use; do not touch them or the attaching hardware immediately after they have been turned off.

-

Do not try to replace or clean the headlights with the lights on.

1. Disconnect the 2-P connector(s) from the headlight.
2. Turn the bulb(s) counterclockwise and remove the bulb(s).

Headlamp Switch > < Hazard Warning Switch|Testing and Inspection|Page 9620