acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Testing For a Short to Ground With A Test Light or DVOM|Page 4213 > < Testing For a Short to Ground With A Test Light or DVOM|Page 4211
Page 1
background image

Vehicle Speed Sensor: Description and Operation

How the Circuit Works

With the ignition switch in ON (II) or START (III), battery voltage is supplied through fuse 15 and the BLK/YEL wire to the vehicle speed sensor
(VSS). The sensor is grounded by the BLK wire to G101 The speedometer and other control units in the circuit supply about 5 volts to the ORN wire.
The vehicle speed sensor (VSS) intermittently grounds the ORN wire which generates a pulsed signal in it. The number of pulses per minute
increases/decreases with the speed of the car.

Testing For a Short to Ground With A Test Light or DVOM|Page 4213 > < Testing For a Short to Ground With A Test Light or DVOM|Page 4211