Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
Remove the two Torx bolts using a Torx T30 bit, then remove the driver's airbag.
CAUTION: Be sure to install the SRS wiring so that it is not pinched or interfering with other parts.
5. Install the new airbag(s):
Drivers Side Torx Bolts
Place the driver's airbag into the steering wheel, and secure it with new Torx bolts.
6. Reconnect the airbag connector(s).