acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Turn Signal Switch > < Latch Switch Test and Replacement
Page 1
background image

Trunk Lamp Switch: Service and Repair
Latch Switch Test and Replacement - Hatchback

LATCH SWITCH / TEST AND REPLACEMENT (HATCHBACK)

1. Open the hatch, and disconnect the 2-P connector from the hatch latch switch.

2. There should be continuity between the A terminal and component ground.
3. If necessary, remove the three mounting bolts to pull out the hatch latch switch from the latch, then disconnect the lock rod from the hatch latch

switch.

4. Disconnect the hatch opener cable from the hatch latch switch.

Turn Signal Switch > < Latch Switch Test and Replacement