Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-709001.png)
A/T Gear Position Switch: Description and Operation
Description
This signals the ECM when the transmission is in park or neutral.
How the Circuit Works
With the ignition switch in ON (II) or START (III), voltage is applied to the A/T gear position indicator. The A/T gear position switch provides a
ground for each position. As an input is grounded, its indicator light comes on. If you select R, for example, ground will be applied to the input of the
A/T gear position indicator, and the R indicator bulb will come on.
With the headlight switch in PARK or HEAD, voltage is applied to the RED/BLK wire terminal. This changes the indicator panel illumination from
fixed to controlled by the dash lights dimmer input through the RED wire.
When the Transmission Control Module (TCM) ( '98 - '99 models) or Powertrain Control Module (PCM) ( '00 - '01 models) detects an abnormality in
the automatic transmission control system, or when you request diagnostic trouble codes through the service check connector, the TCM or PCM will
make the D4 indicator light blink.
