Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-719001.png)
Power Window Switch: Testing and Inspection
Master Switch Test
MASTER SWITCH / TEST (HATCHBACK)
1. Remove the driver's door panel.
2. Disconnect the 10-P connector from the switch.
3. Check for continuity between the terminals in each switch position according to the table.
Driver's Switch
The driver's switch is combined with the control unit so you cannot isolate the switch to test it. Instead, run the master switch input test procedures No.
1, 2, 3, and 5. If the tests are normal, the driver's switch must be faulty.
Passenger's Switch
