Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
Starter Armature: Testing and Inspection
Armature Inspection and Test
1. Inspect the armature for wear or damage due to contact with the field winding. If there is wear or damage, replace the armature.
2. Check commutator surface and diameter.
-
If the surface is dirty or burnt, resurface with emery cloth or a lathe within the following specifications, or recondition with #500 or #600
sandpaper.
Commutator Diameter
-
If commutator diameter is below the service limit, replace the armature.