Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
9. Separate the tie-rod ball joint and knuckle using the special tool.
CAUTION: Avoid damaging the ball joint boot.
10. Disconnect the shift linkage.
11. Disconnect the secondary heated oxygen sensor (H02S) connector, and separate the three way catalytic converter by removing the self-locking
nuts.
NOTE: Always replace the caskets with new ones.
12. Remove the return line clamp from the left side of the rear beam, and move the return line above the steering gearbox.
13. Remove the rear beam brace rod.