Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-3411007.png)
15. Thread the right and left tie-rod ends onto the rack an equal number of turns.
16. Reconnect the tie-rod ends to the steering knuckles, tighten the nut to the specified torque, and install new cotter pins.
17. Install the front wheels.
18. Fill the system with power steering fluid and bleed air from the system.
19. After installation, perform the following checks.
-
Check the gearbox for leaks.
-
Adjust the front toe.
-
Check the steering wheel spoke angle. Adjust by turning the right and left tie-rods equally, if necessary.
