acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Steering|Tie Rod > < Airbag Handling and Storage|Page 6582
Page 6
background image

8. Attach the connector in the holder, then install the access panel on the steering wheel lower cover.
9. Connect the positive cable first, then the negative cable to the battery.

10. After installing the airbag assembly, confirm proper system operation:

-

Turn the ignition switch ON (II); the instrument panel SRS indicator light should come on for about six seconds and then go off. 

-

Confirm operation of horn buttons. 

-

Confirm operation of cruise control set/resume switches.

Steering|Tie Rod > < Airbag Handling and Storage|Page 6582