Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-3443002.png)
3. Press the wheel bearing out of the knuckle using the special tools and a press as shown.
4. Remove the wheel bearing inner race from the front hub using the special tool and a commercially-available bearing separator as shown.
NOTE: Wash the knuckle and hub thoroughly in high flash point solvent before reassembly.
5. Press a new wheel bearing into the knuckle using the old bearing, a plate and a press.
NOTE: Press the wheel bearing into the knuckle with the pack seal (metal color) toward the inside. Be careful not to damage the sleeve of the
pack seal.
