Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-2727001.png)
Torque Converter Clutch Solenoid: Service and Repair
Replacement
NOTE: Lock-up control solenoid valves A and B must be removed/replaced as an assembly.
1. Remove the mounting bolts and the lock-up control solenoid valve A/B assembly.
2. Clean the mounting surface and fluid passages, and install a new lock-up control solenoid valve A/B with a new filter/gasket.
3. Check the connector for rust, dirt, or oil, and reconnect it securely.
