Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-2784001.png)
A/T Gear Position Switch: Service and Repair
A/T GEAR POSITION SWITCH / REPLACEMENT
1. Remove the console, then disconnect the 14-P connector from the switch.
2. Remove the two console switch mounting nuts.
3. Position the switch slider to "Neutral" as shown above.
4. Move the shift lever to "Neutral", then slip the switch into position.
5. Attach the switch with the two nuts.
6. Test the switch in the [P] and [N] position of the shift lever. The engine should start when the shift lever is in position [P] anywhere in the range of
free play.
7. Connect the 14-P connector, clamp the harness and install the console.
