Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-2875011.png)
NOTE:
-
Make sure the band and clip do not interfere with anything, and the band does not move.
-
Remove any grease remaining on the surrounding surfaces.
18. Install the new set ring.
Outboard Joint Side:
1. Wrap the splines with vinyl tape to prevent damage to the outboard boot.
2. Install the outboard boot. Take care not to damage the outboard boot.
3. Remove the vinyl tape.
4. Install the new stop ring into the driveshaft groove.
