Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-2881001.png)
Wheel Bearing: Service and Repair
Front
NOTE: Replace the bearing with a new one after removal.
1. Separate the front hub from the knuckle using the special tools and a press as shown.
CAUTION:
-
Take care not to distort the splash guard.
-
Hold onto the hub to keep it from falling when pressed clear.
2. Remove the circlip and the splash guard from the knuckle.
