Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-5283004.png)
4. Apply the double-faced adhesive tape to the inside of the rear window as shown.
5. Glue the molding around the edge of the rear window as shown.
6. Install the upper fasteners, and glue the lower fasteners to the body as shown.
NOTE: The numbers after the parts names show quantity of the part used.
7. Glue the side and lower spacers and fasteners to the inside face of the rear window and molding as shown.
