Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
18. Let the adhesive dry for at least one hour, then spray water over the rear window and check for leaks. Mark leaking areas, let the rear window
dry, then seal with sealant.
NOTE: Let the car stand for at least four hours after rear window installation. If the car has to be used within the first four hours, it must be
driven slowly.
19. Reinstall all remaining removed parts.
NOTE: Advise the customer not to do the following things for two to three days:
-
Slam the doors with all the windows rolled up.
-
Twist the body excessively (such as when going in and out of driveways at an angle or driving over rough, uneven roads).