Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-5281002.png)
NOTE:
-
Apply glass primer around the entire groove of the new molding.
-
Do not apply glass primer to the outer surface.
9. Run a bead of adhesive in the groove of the molding.
10. Place the rear window out side-up, then align the joint of the molding with the "T" mark at the top of the glass as shown.
11. Press the molding into position around the entire edge of the rear window.
