Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-5291011.png)
5. Measure clearance "H" again to make sure it is still within the specified limits at the designated locations.
NOTE: Repeat the above steps until the correct clearances are obtained.
15. After the clearances have been adjusted properly, reinstall the weatherstrip.
16. Check that the glass contacts the weatherstrip evenly.
NOTE: Measuring points are described.
17. Check for water leaks.
NOTE: Do not use high-pressure water.